The value of the parameter of a program can be operated by a MIDI controller. (Only when OUT is WAVE)

Please set the parameter operated by a controller in a "MIDI Control Change to Edit" window.
Moreover, if a "MIDI IN OVER DUB" button is used, the data operated by the controller is recordable.

In the set of the above figure, the value of "TUNE" of "PAD A01" is operated by the controller which transmits the control change 3 of a channel 1.

Edit of the data operated by the controller


When "Out" is WAVE, if "CTRL" is clicked, it will become the mode of C.C.EDIT and edit of the recorded data can be performed.

In this mode, when "MIDI IN REC" or a "MIDI IN OVER DUB" button is clicked and recorded, only the data from a controller is recorded.
An event is not recorded even if it hit PAD of a controller.
Moreover, a note event is not erased even if it records by "MIDI IN REC".
Only the data of a parameter is erased and new data is recorded.



Edit of Bend


Please select the region to edit, holding the left button of a mouse.
And please click the command of a menu.
When you insert an data by a controller, please click and insert "MIDI ID REC" or a "MIDI IN OVER DUB" button.


If the right button of a mouse is clicked in the "Pitch Bend" field, a menu will open.
A click of "Erase Bend in a track" will erase all the Bend data in an active track.

Edit of data


Please turn the wheel of a mouse and select the parameter to edit in the parameter field.


Please select the region to edit, holding the left button of a mouse.
And please click the command of a menu.
When you insert an data by a controller, please click and insert "MIDI ID REC" or a "MIDI IN OVER DUB" button.


When you insert data with a mouse, please insert data after selecting PAD in which data is made to reflect.
It is not reflected in the PAD even if it changes a PAD number, after inserting data.


If the right button of a mouse is clicked in the parameter field, a menu will open.
If "Erase This data in a track" is clicked, all the data of the select parameter will be erased. (Only data of an active track)