Explanation of the parameter of OUT and a program


When the type of tracks is PAD

Chop	Please select a Chop number, when Chop chooses WAVE of ON.
Mode	ONE SHOT: WAVE is played to the end. NOTE ON: Plays the WAVE only while you hold the pad or keyboard.
Voice Overlap	ON: The sound during release pronounces a new note, without erasing. OFF: The sound during release is erased and pronounces a new note.
Atack(Attack)	The parameter which sets time until it reaches the maximum volume of the sound from a performance start. The larger the value, the slower the sound will start.
Decy	The starting point of Decay is set. When Decay Mode is END The start point of the decay will be set so that the fade out will end at the waves end point. The time of fade-out will become long, so that a value is large. (A value is 100 and it is about 5 seconds) When Decay Mode is STA (START) Decay is started from the start of WAVE. The time of fade-out will become long, so that a value is large. When Attack is set, Decay is started from an ending point of Attack.
Pitch EG	Depth: A pitch changes a lot, so that a value is large. (1= half tone) Time: A pitch changes slowly, so that a value is large.
Pitch LFO	Depth: A pitch changes a lot, so that a value is large. (A vibrato is added to sound) Freq.: A pitch changes quickly, so that a value is large.
Ring Mod.(Ring Modulation)	WAVE and a sine wave are mixed and a metallic sound is made. Mix: The sound by which Ring Modulation was carried out becomes large, and an original sound becomes small, so that a value is large. Freq.: The frequency of a sine wave becomes high, so that a value is large. Note When the value of "Mix" is 10-100 (except OFF), "Pitch EG" and "Pitch LFO" work as a parameter of the sine wave of a Ring Modulation.
Over Drive

If the right button of a mouse is clicked, all the pads can be selected.
Selection will be canceled if a right button is clicked once again.


If cursor is moved pressing the right button of a mouse, two or more selections can be performed.


A value can be copied if cursor is moved pressing the left button of a mouse.


WAVE can be dragged and assigned from "Wave list".

Next page